Soundpeats has built a following by selling earbuds that look and spec like premium models for a fraction of the price. The Air6 Pro continues that play: $89.99 in the US on Soundpeats’ own store page, versus $249 for Apple’s AirPods Pro 3 on Apple’s US store. Regional prices vary by marketplace, and Soundpeats says the final price is confirmed at checkout.

What changed in this update (21 November 2026): We corrected the battery comparison. Soundpeats rates the Air6 Pro at up to 12 hours on a single charge and up to 52 hours total with the case, not 52 additional hours on top of 12. Those figures assume AAC at 60 percent volume in Normal Mode with ANC off. We also corrected the AirPods Pro 3 comparison to Apple’s official 8 hours with ANC and 24 hours total with the case, added the rated −58dB adaptive ANC figure, and added Soundpeats’ product and FAQ pages as sources.

How this was reported: SoilTune has not independently tested either pair of earbuds. This comparison uses published specifications and early coverage, and we will update it when independent reviews are available.

The pitch is simple. Stemmed design, 11mm drivers, Bluetooth 6.0, LDAC support, adaptive noise cancellation, four microphones per bud, up to 12 hours of playback on a single charge and up to 52 hours total with the case. On paper, the Air6 Pro beats Apple in several places. In practice, TechRadar’s Tom Bedford has only had one short listening session, so the most important claims are still unverified.

Here is what the Air6 Pro offers, where it genuinely undercuts the AirPods Pro 3, and where Apple’s buds still have the advantage.

What the Soundpeats Air6 Pro brings

The Air6 Pro follows the Air5 Pro, which TechRadar did not test. The new model steps up from 10mm drivers to 11mm units with a PU + PMI composite diaphragm. Larger drivers do not automatically produce better sound, but they can move more air, which helps with bass and overall output. Soundpeats pairs the driver with its Air Series Tuning Gen2 profile, which the company says brings vocals and instrument separation forward compared with the bass-heavy Gen1 tuning.

Connectivity is handled by Bluetooth 6.0 on a Qualcomm QCC3091 chip. The buds support Dolby Audio, Snapdragon Sound, LE Audio, aptX Lossless, LDAC and AAC. The official spec sheet also lists wireless charging, wear detection, multipoint pairing and five ear tip sizes from XS to XL. Each earbud weighs about 4.5 grams and carries an IPX5 rating, which covers sweat and light rain but applies to the buds only, not the case.

Noise cancellation is adaptive and rated at up to −58dB, up from −55dB on the Air5 Pro. There are four microphones per earbud and CVC call noise reduction. Soundpeats says the rating is a laboratory figure and that real performance depends on fit and the type of noise, which is the right caveat.

The battery figures are the ones to read carefully. Soundpeats says up to 12 hours on a single charge and up to 52 hours in total with recharging from the case. Both numbers were measured using AAC at 60 percent volume in Normal Mode, with ANC and additional sound-processing modes off. ANC, Dolby Audio and higher-bitrate codecs can reduce playback time. A 10-minute quick charge provides roughly 4 hours of playback under the same AAC, ANC-off conditions.

Where it beats the AirPods Pro 3 on paper

Price. This is the headline. At $89.99, the Air6 Pro costs less than half of Apple’s $249 pair in the US. For buyers who want stemmed earbuds without paying Apple prices, that alone will be enough to get a look. Soundpeats is also running a launch promotion that takes up to 20 percent off and adds a free panda case cover in some markets, but those terms are time-limited and vary by country.

LDAC. Apple’s AirPods Pro 3 still do not support LDAC. The codec carries more audio data than AAC over a Bluetooth connection, which can improve detail on high-resolution tracks. Whether you hear a difference depends on the source, the fit and the recording, but it is a real spec advantage for Android users.

Battery. Soundpeats claims 12 hours on a single charge against Apple’s official 8 hours with ANC enabled. The case comparison is also wider: Soundpeats claims 52 hours total, while Apple rates the AirPods Pro 3 at up to 24 hours total with the MagSafe case and ANC on. The testing conditions differ, and the Soundpeats figure assumes ANC is off, so the gap in real use will be smaller than the raw numbers suggest. The direction is still clear.

Driver size. The 11mm drivers are larger than the 10mm units in the Air5 Pro. Apple does not market a driver size for the AirPods Pro 3, so this is not a like-for-like comparison with Apple, but it is an upgrade over the previous Soundpeats model.

Connectivity. Bluetooth 6.0 is newer than the Bluetooth 5.3 in the AirPods Pro 3. That does not guarantee better range or stability, because the source device also has to support it, but it gives the Air6 Pro more headroom on newer Android phones.

Where Apple still has the edge

Spec sheets do not capture the things that make AirPods feel expensive. If you use an iPhone, the AirPods Pro 3 pair instantly, switch between Apple devices, support spatial audio with head tracking, show up in Find My and receive firmware updates through the system. The case is small, the fit is well understood and the transparency mode is among the best in the category. Apple also rates the AirPods Pro 3 at IP57 for the buds and the case, which is a tougher standard than the Air6 Pro’s IPX5 buds-only rating.

Soundpeats can match some of those features, but not the whole package. The early hands-on also found the Air6 Pro a little fiddly to seat in the case, which is a small thing that becomes annoying over time. Apple’s case design is more polished.

The biggest unknown is noise cancellation. Bedford described the Air6 Pro’s ANC as solid in an initial test, but “solid” is not the same as the class-leading cancellation Apple delivers. The −58dB rating is a lab number, and Soundpeats itself says performance varies with fit and noise type. A full review with commuter, office and street testing will settle that.

The codec catch

LDAC is a genuine advantage, but only if your phone supports it. Many modern Android phones do. iPhones do not. If you use an iPhone, the Air6 Pro will fall back to AAC, just like the AirPods Pro 3, and the codec advantage disappears. Soundpeats confirms this on its own FAQ page.

There is a second trade-off inside the Air6 Pro itself. Multipoint pairing and LDAC cannot be used at the same time. You can have LDAC or you can stay connected to two devices, not both. That is a real limitation for anyone who wants high-resolution audio and a phone-to-laptop handoff.

Snapdragon Sound is similar. It works best with a Snapdragon-equipped Android phone and a compatible source. Hi-Res Audio Wireless requires high-resolution files or streams and a compatible connection. Bluetooth 6.0 needs a Bluetooth 6.0 source to deliver its improvements; many phones still ship with older versions.

In other words, the Air6 Pro’s spec sheet is strongest for Android users who know their phone supports LDAC and who have high-resolution audio to play. For everyone else, the practical difference is smaller than the marketing suggests.

Early impressions

TechRadar’s Tom Bedford, who previously reviewed the Soundpeats H3, had a short listening session with the Air6 Pro before publishing his news piece. He described the buds as nondescript, a little fiddly to get into the case, energetic in sound and secure in the ears. He also said the ANC sounded solid in that first pass.

That is a promising start, not a verdict. A short session cannot answer the questions that matter most: how the tuning holds up across genres, whether the ANC works on a noisy train, how the microphones handle calls in the wind, whether the fit stays comfortable after two hours, and how the battery performs in real use. TechRadar says a full review is coming, and until then the claims are the company’s own.

Should you buy the Air6 Pro?

If you have an Android phone with LDAC and want a cheap second pair, the Air6 Pro is worth a look. The price is low, the codec support is good and the battery claims are strong. It could be a good commute pair or a backup set that stays in a bag.

If you have an iPhone, the LDAC advantage is irrelevant. The AirPods Pro 3’s integration, transparency mode and case design are worth more than the spec gap for most Apple users. The Air6 Pro is still cheaper, but you are buying it for price, not for codecs.

If noise cancellation is your priority, wait for the full review. Apple’s ANC is the benchmark in this price class, and Soundpeats has not been independently tested yet. The same goes for call quality, which is often where budget buds fall short.

If you want the safest budget pick, the Soundpeats H3 is the model the reviewer already trusts. The Air6 Pro may beat it on paper, but the H3 has a track record. A few weeks of reviews will make the choice clearer.

The bottom line

The Soundpeats Air6 Pro is a strong value proposition on paper: less than half the price of the AirPods Pro 3, LDAC support, a larger driver and longer claimed battery life. That is exactly the kind of spec sheet that makes budget earbuds exciting.

But the AirPods Pro 3 are not sold on specs. They are sold on fit, integration and consistently good noise cancellation. The Air6 Pro may close some of that gap, and it may not. Until the full reviews arrive, the honest recommendation is to treat the Air6 Pro as a promising budget option, not a proven AirPods killer.

Have a tip? Email [email protected] or use the contact form and choose Editorial. We do not promise anonymity.

Sources: Soundpeats (Air6 Pro product page); Soundpeats (Air6 Pro FAQ and launch terms); Apple (AirPods Pro 3 tech specs); Apple (AirPods Pro 3 price); TechRadar; The Japan Times; HiTech Reports; Tech Edition.

Last reviewed: 21 November 2026.